Common problems and solutions in the use of Glorious handheld laser welding machine

In the current welding field, the use of hand-held laser welding machines has become extremely common. It is very popular among users because of its convenient operation, portability, fast welding speed and high product yield. However, when using a handheld laser welding machine, there may be some problems. Below, Shandong Glorious Intelligent Technology Co., Ltd. will sort out the common faults of laser welding machines and how to deal with them.

• The solubility of laser welding machine is not enough

It can be solved by increasing the pulse width and increasing the current, or adjusting the defocus amount close to the point position.

It can be solved by reducing the air flow through the flow rate of the protector, or reducing the temperature of the cooling water and increasing the water temperature. If the workbench is not cleaned, you can re-clean the workbench.

•  If the weld seam is very deep when the laser welding machine welds

Then it is necessary to use nitrogen or other inert gas in time, or adjust the airflow direction of the protector, which is opposite to the movement direction of the workpiece.

•  If the laser beam is weakened when the laser welding machine is welding

It can be solved by changing the cooling water. If the main optical path laser is deviated, it is necessary to adjust the main optical path total return or semi-reflection film.

•  If there is an open flame and it does not fully bounce

Then you need to check whether there is any remaining oil on the shutter connection.

The above are the common faults and treatment methods of laser welding machines of Shandong Glorious Intelligent Technology Co., Ltd., I hope to bring help to everyone.