Publish Time: 2022-01-26 Origin: Site
In order to ensure the longer stability and service life of the machine, the laser cutting machine needs to be cleaned, organized and maintained regularly. The engineer needs to conduct a comprehensive inspection of the machine on a regular basis. In addition, during the daily use of the machine, the door of the electrical cabinet should be closed to achieve better dust-proof purposes. The water cooler and air compressor should also be regularly cleaned of dust and dirt. Excessive accumulation of dust will affect the working efficiency of the machine.
Laser cutting machines need to regularly check the lubrication conditions of some parts and equipment when they are in use. After the machine has been out of use for a long time, it is necessary to check the lubrication condition of the entire machine tool when it is activated again, and clean up the solidified lubricating oil in the lubrication system and add new lubricating oil, which has achieved the good running effect of the machine. .
Engineer need to regularly check the parts and safety devices of the laser cutting machine. Check whether the safety cover of the machine is in good condition, check whether the screws and valves are loose, and if the parts are loose, they should be reinforced in time to ensure that each part of the equipment and parts on the cutting machine are firm. The dust removal system of the machine should also be checked and cleaned regularly to reduce the speed and amount of dust accumulation during the cutting process.